- Electronics People Since 1965
- +91-9821745455
- hiren@brilliantelectronics.com
Seeed Studio XIAO ESP32 C3 - RISC-V Wi-Fi & Bluetooth MCU Board

Product Enquiry
Product Features
Seeed Studio XIAO ESP32C3 – Tiny MCU Board With Wifi And BLE Battery Charge Supported Module
Seeed Studio XIAO ESP32C3 featuring ESP32C3 carries a complete Wi-Fi system along with Bluetooth Low Energy function. With its exquisite design and WiFi+BT ability, it’s perfect for various IoT controlling scenarios and complex carriable applications. The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with a complete 2.4GHz Wi-Fi subsystem which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under an ultra-low power state, also supporting features of Bluetooth 5 and Bluetooth mesh. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
Processor:
1. ESP32-C3 SoC
2. RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz
Wireless:
1. Complete 2.4GHz Wi-Fi subsystem
2. Bluetooth 5.0/ Bluetooth mesh
Interface:
-
1x UART, 1x IIC, 1x IIS, 1x SPI,11x GPIO(PWM), 4x ADC
-
1x Reset button, 1x Boot button
Features of Seeed Studio XIAO ESP32C3:
-
Outstanding RF performance, Powerful ESP32-C3 SoC, and U.FL antenna provided that supports WiFi/Bluetooth connection over 100m.
-
Thumb-size Design, 21 x 17.5mm overall dimension, portable and lightweight.
-
Low power consumption, Lowest as 44 μA (deep sleep mode), with 4 working modes available.
-
Onboard battery charge IC, Supports battery charging, is great for various wearable scenarios and wireless IoT applications.
-
Ready for productization, Single-sided components design, easily integrated into other boards and Seeed provides Fusion Service for rapid production.
Features/Specs:
-
Brand: Seeed Studio
-
On-chip Memory: 400KB SRAM & 4MB Flash
-
Circuit operating voltage: 3.3V@200mA
-
Charging current: 50mA/100mA
-
Input voltage (VIN): 5V
-
Deep Sleep Power Consumption: >44μA
-
Active Model: <75 mA
-
Modem-sleep Model: <25 mA
-
Light-sleep Model: <4 mA
-
Length: 13.5 mm
-
Width: 19 mm
-
Height: 4.6 mm
-
Weight: 5 gm
Part Descriptions
Applications of Seeed Studio XIAO ESP32C3 :
-
Internet of Things
- Wearable devices
- Health monitoring
- Education
- Low-Power(LP) networking
- Rapid prototyping
Package Includes:
1 x Seeed Studio XIAO ESP32C3 – Tiny MCU Board
1 x Antenna