Product Features

Ultra Low Power WakeUp Transceiver allow to optimaze the power consumption for IoT application.

It’s a transceiver module that uses «wake up receiver tecnique» to be used in very low consumption applications.The WakeUp-Receiver continuously monitors the wireless channel (without the use of a microcontroller) and recognizes if there are any radio signals addressed to him, in this case it returns the data received on the serial interface.

The device wakes up every 1000ms (this time is programmable) for a time of 250µsec.In this conditions the average of the consumption is 10µA with a Sensibility of -110dBm.The device RC-WuTRx-XXX is based on the CC1310 device from Texas Instrument, and is available at  three frequencies : 433MHz - 868MHz and 915MHz.

The functionalities of this device are the following :

• Wireless Switch the 4 outputs of the module A correspond to the 4 inputs of module B and the other way around.
• Wireless Actuator by serial port you can control 4 Output in monostable and bistable mode.
• Radio Modem have the functions of a complete radio modem and simply require CMOS/TTL data at the transmit input and the corresponding transceiver(s) output the same data.
•  Preamble and CRC are automatically generated and added to the RF transmission.

Datasheet: https://www.radiocontrolli.com/media/1327_79919cb38001c22249e735bb7a2fc3e55afd606a.pdf/o/RC-WuTRx-XXX_IT.pdf

Part Descriptions

• RC-WuTRx-433   433MHz Version 
• ​RC-WuTRx-868   868MHz Version
• RC-WuTRx-915   915MHz Version