- Electronics People Since 1965
- +91-9821745455
- hiren@brilliantelectronics.com
TFFAM-0.5
Fast cutting mill; Tip mat: tungsten carbide
Fast cutting mill; Tip mat: tungsten carbide
GSR-03475080
Mill; with a drill bit; high speed steel grounded HSS-G; L: 90mm
Mill; with a drill bit; high speed steel grounded HSS-G; L: 90mm
RECA-2665-120-51
Fast cutting mill; Ø: 6mm; Ø: 6mm; steel,cast iron; A; sleeve
Fast cutting mill; Ø: 6mm; Ø: 6mm; steel,cast iron; A; sleeve
RECA-2665-120-43
Fast cutting mill; Ø: 10mm; Ø: 6mm; steel,cast iron; A; sleeve
Fast cutting mill; Ø: 10mm; Ø: 6mm; steel,cast iron; A; sleeve
PR28722
Mill; tungsten vanadium steel; 2pcs.
Mill; tungsten vanadium steel; 2pcs.
PG-M5915
Fast cutting mill; Ø: 3.2mm; Ø: 3.2mm; ceramic tile,plaster
Fast cutting mill; Ø: 3.2mm; Ø: 3.2mm; ceramic tile,plaster
TFFAM-0.8
Fast cutting mill; Tip mat: tungsten carbide
Fast cutting mill; Tip mat: tungsten carbide
DCFBM-1.5
Diamond mill; Ø: 1.5mm; Ø: 3.175mm; Working part len: 6mm; L: 38.2mm
Diamond mill; Ø: 1.5mm; Ø: 3.175mm; Working part len: 6mm; L: 38.2mm
DCFBM-1.0
Diamond mill; Ø: 1mm; Ø: 3.175mm; Working part len: 6mm; L: 38.2mm
Diamond mill; Ø: 1mm; Ø: 3.175mm; Working part len: 6mm; L: 38.2mm
PR28758
Mill; tungsten carbide; 1mm
Mill; tungsten carbide; 1mm
DCFBM-2.2
Diamond mill; Ø: 2.2mm; Ø: 3.175mm; Working part len: 90mm
Diamond mill; Ø: 2.2mm; Ø: 3.175mm; Working part len: 90mm
TFFAM-0.6
Fast cutting mill; Tip mat: tungsten carbide
Fast cutting mill; Tip mat: tungsten carbide
TFFAM-0.7
Fast cutting mill; Tip mat: tungsten carbide
Fast cutting mill; Tip mat: tungsten carbide
PR28710
Mill; tungsten vanadium steel; 5pcs.
Mill; tungsten vanadium steel; 5pcs.
EDDAC-1.6
Fast cutting mill; Ø: 1.6mm; Ø: 3.175mm; L: 38.2mm
Fast cutting mill; Ø: 1.6mm; Ø: 3.175mm; L: 38.2mm
TFFAM-1.9
Fast cutting mill; Tip mat: tungsten carbide
Fast cutting mill; Tip mat: tungsten carbide
DCFBM-2.4
Diamond mill; Ø: 2.4mm; Ø: 3.175mm; Working part len: 90mm
Diamond mill; Ø: 2.4mm; Ø: 3.175mm; Working part len: 90mm
56T609
Mill; Ø: 8mm; wood; Working part len: 38mm; two-flute; Ø: 9mm
Mill; Ø: 8mm; wood; Working part len: 38mm; two-flute; Ø: 9mm
PG-M1020
Fast cutting mill; Ø: 2.3mm; Ø: 2.35mm; milling,engraving,carving
Fast cutting mill; Ø: 2.3mm; Ø: 2.35mm; milling,engraving,carving
GSR-04112130
Mill; 3mm; Material: cemented carbide
Mill; 3mm; Material: cemented carbide
CATEGORY
Unclassified
